Dog door size calculator
A dog door is a hole you cannot make smaller. Get the flap height from the shoulder measurement first, then pick the panel — not the other way round.
The standard panel sizes we match to
| Panel | Flap height | Flap width | Typical dog |
|---|---|---|---|
| Small | 11 in | 7 in | up to 15 lb |
| Medium | 15 in | 9 in | up to 40 lb |
| Large | 20 in | 12 in | up to 90 lb |
| X-Large | 26 in | 15 in | up to 220 lb |
Flap sizes are the common range across US panel makers; brands differ by an inch. The weight column is a rough guide only — the measured height always wins.
Before you cut
- Check what is inside the door or wall: wiring, a glazed panel, a steel plate.
- Mark the flap height from the floor the dog stands on, not the outside ground level.
- Leave a 2 in border of solid material around the cut-out.
- For a rental, a panel that replaces a sliding-door section avoids cutting anything.
Frequently asked
How tall should a dog door be?
Shoulder height plus 2 inches, so the dog can pass through without ducking. A flap that is exactly shoulder height gets pushed with the head, which is how dogs learn to avoid it.
How wide should a dog door be?
Body width plus 2 inches. Most standard panels are generous on width and tight on height, so height is the number that decides the size.
What if my dog is between two panel sizes?
Take the larger panel. The flap can be shortened with a replacement flap, but the cut-out in the door cannot be made smaller.
Do I need a tunnel extension?
For a brick wall, a thick door or a wall with cladding, yes. A flap mounted on a 4 in wall without a tunnel leaves a gap the dog can catch a leg in.
Related: how to measure your dog · crate size calculator